Spreader Beams consist of a long beam that converts the lifting load into a bending moment through the beam. This is a much less efficient use of material, and as a result, spreader beams are in general heavier than spreader bars. The main benefit of spreader beam is the substantially reduced headroom required to perform the lift. These qualities make spreader lifting beams well-suited to lighter, shorter span lifts that have a small headroom requirement, such as in smaller manufacturing shops or storage facilities. The EW-CSB 2x2 Crane Spreader Beam is 2 metres in length and has SWL of 2 tonnes. The 2x2 Spreader Beams are supplied standard with 5 lifting positions and also supplied with 2 safety swivel hooks.
Crane Spreader beam is painted safety yellow colour in enamel paint. The EW-CSB 3x3 Crane Spreader Beam is 3 metres in length and has SWL of 3 tonnes. The 3x3 Spreader Beams are supplied standard with 5 lifting positions and also supplied with 2 safety swivel hooks.
The EW-CSB 5x4 Crane Spreader Beam is 4 metres in length and has SWL of 5 tonnes. The 5x4 Spreader Beams are supplied standard with 5 lifting positions and also supplied with 2 safety swivel hooks.
EW-BBS100 Bulk Bags are widely used as a cost effective, efficient and eco-friendly solution for storing and transporting bulk materials. Fully loaded, their size and weight require the right equipment to ensure the safe and productive handling of bulk bags in the workplace. The BBS100 Bulk Bag Stand is designed to safely hook open a bulk bag for filling. This lightweight frame provides an effective solution for collecting recycling, industrial, excavation and site waste or as a low cost bulk material filling station.
Bulk Bags are widely used as a cost effective, efficient and eco-friendly solution for storing and transporting bulk materials. Fully loaded, their size and weight require the right equipment to ensure the safe and productive handling of bulk bags in the workplace. This Bulk Bag Stand is designed to safely hook open a bulk bag for filling. Featuring a sturdy base with fork pockets and crane lugs, this bulk bag holding frame provides an effective solution for collecting, storing & transporting recyclable, industrial, excavation and site waste by forklift and crane or can be used as a bulk material filling station.
The EW-CEXL1726 Crane Spreader Beam is designed to lift long loads via the centre single hook point as a Lifting Beam, or end lifted using a 2 leg chain sling as a Spreader Beam / Crane Spreader Bar with a truck-mounted or overhead crane.
The type EW-CFL-2439 Spreader Beam is a unique multitasking Beam which can be used by Crane or Forklift to lift long loads. Using a Crane, loads can be lifted via the centre single hook point (as a "Lifting Beam"), or end lifted using a 2 leg Chain Sling (as a ‘Spreader Beam’). If lifting by forklift, the 600mm long slipper pockets allow for fast and safe connection to the truck.
The EW-FS25-M Fork Spreader is designed to safely lift extra wide or flexible loads without the risk of damage to products such as plasterboard, roof sheeting and timber.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This EW-CEM-2439 Crane Spreader Beam is designed to lift long loads via the centre single hook point as a Lifting Beam, or end lifted using a 2 leg chain sling as a Spreader Beam with a truck mounted or overhead crane.
This EW-CEL-2439 Crane Spreader Beam is designed to lift long loads via the centre single hook point as a Lifting Beam, or end lifted using a 2 leg chain sling as a Spreader Beam with a truck mounted or overhead crane.