A work box means a personnel carrying device designed to be suspended from a crane to provide a working area for a person elevated by and working from the device. The most popular work cage in the Maxirig range, this unit balances capacity with a slim profile. The unit carries HW fixtures for attachment of safety harnesses and fully internal handrailing.
A work box means a personnel carrying device designed to be suspended from a crane to provide a working area for a person elevated by and working from the device. Specially designed for access to difficult to reach areas, this cage offers a cantilevered floor projecting well ahead of the lift slings. Ideal for use on overhead or recessed works where a traditional cage cannot reach and fitted with counterweight to ensure stability.
A work box means a personnel carrying device designed to be suspended from a crane to provide a working area for a person elevated by and working from the device. This cages continues to offer the narrow profile but with the added protection of a roof. The unit carries HW fixtures for attachment of safety harnesses and fully internal handrailing.
Spreader Beams consist of a long beam that converts the lifting load into a bending moment through the beam. This is a much less efficient use of material, and as a result, spreader beams are in general heavier than spreader bars. The main benefit of spreader beam is the substantially reduced headroom required to perform the lift. These qualities make spreader lifting beams well-suited to lighter, shorter span lifts that have a small headroom requirement, such as in smaller manufacturing shops or storage facilities. The EW-CSB 2x2 Crane Spreader Beam is 2 metres in length and has SWL of 2 tonnes. The 2x2 Spreader Beams are supplied standard with 5 lifting positions and also supplied with 2 safety swivel hooks.
Maintaining a slim profile, this unit is sized to accommodate three persons with sufficient space for a quantity of tools and materials. The unit carries forged Harris Walton fixtures for attachment of a safety harness and fully internal handrailing. Supplied with 2.3mtr dedicated multileg chain sling to suit.
Maintaining a slim profile, this unit is sized to accommodate three persons with sufficient space for a quantity of tools and materials. The unit carries forged Harris Walton fixtures for attachment of a safety harness and fully internal handrailing. Supplied with 2.3mtr dedicated multileg chain sling to suit. Where extra capacity is required, this unit accommodates 3 persons easily with space for tools and materials. The unit carries HW fixtures for attachment of safety harnesses and fully internal handrailing.
Maintaining a slim profile, this unit is sized to accommodate three persons with sufficient space for a quantity of tools and materials. The unit carries forged Harris Walton fixtures for attachment of a safety harness and fully internal handrailing. Supplied with 2.3mtr dedicated multileg chain sling to suit. Where extra capacity is required, this unit accommodates 3 persons easily with space for tools and materials. The unit carries HW fixtures for attachment of safety harnesses and fully internal handrailing.
Crane Spreader beam is painted safety yellow colour in enamel paint. The EW-CSB 3x3 Crane Spreader Beam is 3 metres in length and has SWL of 3 tonnes. The 3x3 Spreader Beams are supplied standard with 5 lifting positions and also supplied with 2 safety swivel hooks.
Maintaining a slim profile, this unit is sized to accommodate three persons with sufficient space for a quantity of tools and materials. The unit carries forged Harris Walton fixtures for attachment of a safety harness and fully internal handrailing. Supplied with 2.3mtr dedicated multileg chain sling to suit. The largest workbox in the current range, this product offers space for 4 people including tools and equipment. The unit is fitted with rated fixtures for attachment of safety harnesses and fully internal handrailing.
The EW-CSB 5x4 Crane Spreader Beam is 4 metres in length and has SWL of 5 tonnes. The 5x4 Spreader Beams are supplied standard with 5 lifting positions and also supplied with 2 safety swivel hooks.
The EW-CBM Concrete Mould is designed to allow surplus concrete to be processed into concrete blocks, reducing the expense and waste of materials when disposing of leftover concrete at the end of day’s pour. Its simple construction and portable design make it the perfect solution for recycling leftover concrete on-site.
EW-CKM10 is a 1.0m3 (1 cubic metre) crane concrete kibble with optional funnel and hydraulic operation available. Only $85 delivery Sydney Metro , Call us for delivery cost all other states.
The EW-STB1 Crane Bin with fork pockets has been designed to provide an economical solution to collecting and disposing of industrial waste and other uses. The bin features a low profile which allows versatility in confined spaces. When transporting the bin to the discharge point the forklift tines are positioned fully under the bin.
The EW-STB2 Crane Bin with fork pockets has been designed to provide an economical solution to collecting and disposing of industrial waste and other uses. The bin features a low profile which allows versatility in confined spaces. When transporting the bin to the discharge point the forklift tines are positioned fully under the bin.
The EW-STB3 Crane Bin with fork pockets has been designed to provide an economical solution to collecting and disposing of industrial waste and other uses. The bin features a low profile which allows versatility in confined spaces. When transporting the bin to the discharge point the forklift tines are positioned fully under the bin.
The EW-STB4 Crane Bin with fork pockets has been designed to provide an economical solution to collecting and disposing of industrial waste and other uses. The bin features a low profile which allows versatility in confined spaces. When transporting the bin to the discharge point the forklift tines are positioned fully under the bin.
The EW-STB5 Crane Bin with fork pockets has been designed to provide an economical solution to collecting and disposing of industrial waste and other uses. The bin features a low profile which allows versatility in confined spaces. When transporting the bin to the discharge point the forklift tines are positioned fully under the bin.
This compact unit is ideal for use in situations where space is limited. The unit carries HW fixtures for attachment of safety harnesses, fully internal handrailing and the added protection of a mesh roof.
EW-WP-NC2 Crane Cage without roof has been designed strictly in accordance with Australian Standard AS 1418.17 and is suitable for a maximum of six people.
EW-WP-NC2R Crane Cage with roof has been designed strictly in accordance with Australian Standard AS 1418.17 and is suitable for a maximum of six people.
The Crane Loading Deck is a safe, convenient and cost effective access solution for loading and unloading materials at multi-storey and high rise projects by crane. Designed to suit smaller construction or demolition projects with limited or constrained space and lighter material loads, this temporary platform helps increase site safety and productivity, while reducing labour time and costs.
The EW-CEXL1726 Crane Spreader Beam is designed to lift long loads via the centre single hook point as a Lifting Beam, or end lifted using a 2 leg chain sling as a Spreader Beam / Crane Spreader Bar with a truck-mounted or overhead crane.
The type EW-CFL-2439 Spreader Beam is a unique multitasking Beam which can be used by Crane or Forklift to lift long loads. Using a Crane, loads can be lifted via the centre single hook point (as a "Lifting Beam"), or end lifted using a 2 leg Chain Sling (as a ‘Spreader Beam’). If lifting by forklift, the 600mm long slipper pockets allow for fast and safe connection to the truck.
DNV / Norsok Crane Cargo Basket has forklift pockets for easy lifting on the ground. It is complete with Certified Lifting Slings (unless otherwise requested)
EW-WP-NC2R-FAID First Aid rescue Crane Cage with roof has been designed strictly in accordance with Australian Standard AS 1418.17 and is suitable for a maximum of six people with outward opening door as dedicated rescue crane cage.
The EW-FS25-M Fork Spreader is designed to safely lift extra wide or flexible loads without the risk of damage to products such as plasterboard, roof sheeting and timber.
The National Sales double pallet goods cage is engineered for use with most overhead crane systems, and can be transported using forklifts or pushed manually.
The EW-CK1H Grout Kibble 1m3 with hose has been designed for the convenient placement of grout in columns, walls and other confined areas. Also suitable for general concrete conveyance along with more liquid grout mixes without leakage.
The EW-CBM-Insert Half Mould Insert is designed for use with the EW-CBM Concrete Mould which enables surplus concrete to be processed into concrete blocks, reducing the expense and waste of materials when disposing of leftover concrete at the end of day’s pour. Usually ex stock
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.
Maintaining a slim profile, this unit is sized to accommodate three persons with sufficient space for a quantity of tools and materials. The unit carries forged Harris Walton fixtures for attachment of a safety harness and fully internal handrailing. Supplied with 2.3mtr dedicated multileg chain sling to suit.
Purpose designed to accommodate a standard rescue stretcher and two attendants, this is a fully enclosed device for use in emergency situations or as a means of transiting personnel to work areas where scaffolding or EWP’s cannot be used.
Retractable Crane Loading Deck is a safe, convenient and cost effective access solution for loading and unloading materials at multi-storey and high rise projects by crane. Designed to suit smaller construction or demolition projects with limited or constrained space and lighter material loads, this temporary platform helps increase site safety and productivity, while reducing labour time and costs.
This EW-CEM-2439 Crane Spreader Beam is designed to lift long loads via the centre single hook point as a Lifting Beam, or end lifted using a 2 leg chain sling as a Spreader Beam with a truck mounted or overhead crane.
This EW-CEL-2439 Crane Spreader Beam is designed to lift long loads via the centre single hook point as a Lifting Beam, or end lifted using a 2 leg chain sling as a Spreader Beam with a truck mounted or overhead crane.
NS-SCBC215 stackable crane bin 1.25m3 are heavy duty bins suitable for all waste products. The space saving shape allows bins to nest inside each other for transport and storage.
NS-SCBC221 bin is 1.8m3 and are suitable for all waste products. The space saving shape allows bins to nest inside each other for transport and storage.
The Stackable Crane Bins are a heavy load bin suitable for the storage and transport of heavy waste, components or parts in all manufacturing and construction sites or used as a craneable spill containment for drums.
The Stackable Crane Bins are a heavy load bin suitable for the storage and transport of heavy waste, components or parts in all manufacturing and construction sites or used as a craneable spill containment for drums.